Macerator
Tri-Hammer macerators have been installed worldwide for the efficient maceration of raw sewage on low flow applications and offer both an improvement in energy consumption and lower spares prices. A three hammer impeller gives more ‘blows’ per revolution for more efficient grinding.
These macerators can be installed vertically or horizontally as a stand alone unit, or, combined with a Mono transfer pump for installation into a pump station.
For customers who have the old type Mutrator units or older design macerators, a special adaptor ring is available to enable easy retrofitting without the need to disturb the existing baseplate or suction pipe.
| 容量 | |
|---|---|
| 立方米 / 小时 | Up to 15 |
| 加仑 / 分钟 | Up to 66 |
应用
| Raw sewage | Industrial effluent |
| Marine effluent |
特性与优点
- Units can operate in a vertical or horizontal mounting position
- A tri-hammer impeller offers more cuts per revolution for efficient maceration
- The inlet chamber contains 2 large anti-swirl fins to stop 'spinning' of textiles and to direct solids in suspension into the optimum flow path for maceration through the impeller
- Entire seal assembly is oil lubricated and mounted out of contact with the liquid being processed giving a substantial increase in seal life expectancy
- Standard IP55 motor, single or 3 phase
- Both models available with straight in or 90° inlet chambers
- Macerators can be supplied to comply with the ATEX Directive 94/9/EC
